My goodness you guys, I have been wanting to refurbish something like this for my kitchen for soooo long! Although, I must warn you, it was not easy, I was exhausted afterwards! Totally worth it though; getting to see it every time I walk in my kitchen makes me smile. It’s a feeling I could never get from buying something. I’m hooked! More projects to come!
- Look for something about the size you want with potential. I found this beaut for $12 at Goodwill. I knew I wanted to paint it white and that I wanted to add some height to it.
- Head to Lowes (with measurements written down). Inspiration begins at Lowes, or Pinterest. For this specific look, I purchased 2 72″ wooden posts, 3 36″ floor tiles that look like distressed wood, a can of liquid nails, sand paper, and of course, 5 cans of white satin spray paint.
- Painting is easy, just unscrew the handles and put tape over the part that is attached. For best results, sand down every surface and wipe clean. 3 coats spread out about 30 minutes each should usually do it.
- While the paint is drying, begin planning your design, this is the trial and error phase. I thought sawing my 2 posts in half and laying them side by side would work… didn’t. I then put two of the posts laying on the front and back of the surface. I measured the space in between and sawed the leftover two to fit. The excess wood sits in the middle for support. Once the design is finished, you can use the liquid nails and glue down each piece. Lastly, glue down the floor tiles on top making sure they sit evenly with the wood.
- Last step, screw back on the handles and wipe down the entire thing, after about 2-3 hours after the last coat of paint was laid.
That’s all there is to it! Have fun and be safe